How long will a battery power my home?
Enter the battery size from its label and the things you actually want to keep running. This worksheet estimates the hours in between — and shows the arithmetic, so you can argue with it.
A battery label states stored energy, but not all of it reaches your outlets. Part is held back to protect the battery (the usable fraction), and part is lost when stored DC power is converted to household AC. That is why real runtime is shorter than the simple label division suggests, and why this page asks about both instead of hiding them.
Intermittent appliances matter too. A fridge that draws 120 W while its compressor runs, but only runs about 40% of the time, averages roughly 48 W. The duty cycle field below captures that, load by load.
Worked example (the pre-filled numbers)
A 2,048 Wh nameplate battery at 90% usable gives 1,843.2 Wh of usable energy. A 120 W fridge at a 40% duty cycle averages 48 W on the outlets. At 85% efficiency the battery must supply 48 ÷ 0.85 ≈ 56.5 W, plus 10 W of separately counted idle draw — about 66.5 W in total. Runtime is therefore 1,843.2 ÷ 66.5 ≈ 27.7 hours.
What this estimate can and cannot tell you
It estimates energy duration only. It cannot promise that a particular appliance will start or run safely: motors and compressors can demand brief startup power far above their running watts, and whether a given unit handles that depends on the maker's continuous and surge ratings for your exact model. Those ratings are not guessed here, and no compatibility is certified on this page. If in doubt, check the manuals for both devices.
Real runtime also varies with temperature, battery age, and how duty cycles behave on the day. Treat the result as a planning estimate with visible assumptions, not a guarantee. There is no mains-wiring guidance on this page; anything that involves fixed wiring belongs to a qualified electrician.
Method and sources
Formulae follow basic electrical definitions — energy = power × time, and watt-hours = amp-hours × volts — consistent with the BIPM SI unit definitions, the NIST Guide to the SI (SP 811), and the U.S. Energy Information Administration's guide to measuring electricity. Inverter conversion context: U.S. Department of Energy, Inverters and Grid Services Basics. Full method, including the single energy boundary used here, is on how our calculators work.