Backup power & outages, in plain language
When the power goes out — or when a battery label just looks like alphabet soup — three questions do most of the work. Each one below has a free worksheet that shows its arithmetic.
Nothing here is for sale and nothing here collects your details. The calculators run entirely in your browser, state every assumption they use, and refuse to invent numbers — no made-up electricity prices, no guessed voltages, no promised runtimes. Where a figure depends on your equipment, the worksheet asks you for it instead of assuming.
How long will my battery last?
Pick the loads you care about — fridge, lights, router — and get an honest runtime estimate that accounts for usable capacity and conversion losses.
Use the runtime calculatorWhat do Wh, Ah and kWh mean?
Convert between the three units on battery labels, with the formulae shown and the classic amp-hour trap called out.
Use the converterWhat does this appliance cost to run?
Daily energy in kWh, and — using the price per kWh from your own bill, never an invented one — the cost per day, billing period and year.
Use the running-cost calculatorHome backup guides
- What can a 2 kWh power station actually run? — realistic runtimes for everyday loads, worked from label watts and duty cycles.
- Generator vs battery backup: honest trade-offs — the practical differences between fuel and battery backup for a home outage.
- Power outage checklist: what to run first — a worksheet for deciding which loads matter most when the power goes out.
Electricity and solar guides
- Why does my battery drain faster than the label says? — usable capacity, inverter loss, idle draw and temperature, as a diagnostic checklist.
- kW vs kWh: battery storage terms in plain language — power versus energy versus usable capacity, without the jargon.
- How many solar batteries do I need? — a sizing worksheet for solar battery storage.
Networking references
- SFP vs SFP+ vs SFP28: what actually differs — a comparison reference for the common SFP form factors.
- What is an optical transceiver? Reach and fibre types — what transceivers do and how reach and fibre type affect a link.
- Rack PDU basics: metered vs switched — the difference between metered and switched rack power distribution units.
How to use this hub during an outage
Work out what must stay on first — usually food refrigeration, a light or two, phone charging and internet — then put just those loads into the runtime calculator with honest duty cycles. Dropping one large always-on load typically buys more hours than any other single change, and the worksheet's per-load shares show you exactly which load that is.
Two limits apply everywhere on this hub. These pages estimate energy and cost; they cannot certify that a specific appliance will start or run safely on a specific battery — startup surges and model ratings live in the manufacturers' manuals. And there is deliberately no mains-wiring guidance here: anything involving fixed wiring belongs to a qualified electrician.
Method, sources and accountability
Every formula on this hub is written out on how our calculators work, with primary references: the BIPM SI unit definitions, the NIST Guide to the SI, the U.S. Energy Information Administration on measuring electricity, and the U.S. Department of Energy on inverter basics.