Tradvolt

What Is an Optical Transceiver? Reach and Fibre Types

Last reviewed: . Free reference — no quote or form needed. Methods and limits are stated on this page.

This page explains networking terms and how to check compatibility. It does not certify that a specific module or product will work in a specific host — the host manufacturer’s supported list and the exact datasheet decide that.

Short answer: an optical transceiver is the removable module that turns a switch or server port's electrical signals into light pulses for a fibre cable, and received light back into electrical signals. The letters in its name describe its intended reach and fibre type: SR types are built for short distances on multimode fibre, and LR types for longer distances on single-mode fibre. Both ends of a link must use the same class on the same fibre type.

Multimode vs single-mode in one paragraph

Multimode fibre has a wider core and is typically used with 850 nm optics for links inside a building or data hall. Single-mode fibre has a narrow core and is typically used with 1310 nm (or longer wavelength) optics for links between buildings or over kilometres. The two fibre types are not interchangeable for a given optic: an SR multimode optic is not specified to work over single-mode plant, and vice versa.

Reach figures you can rely on — with their conditions

Reach is only meaningful together with the fibre grade. For the widely used 10G generation, a Texas Instruments SFF-8431 application note summarises 10GBASE-SR as up to 300 m on OM3 multimode fibre, and 10GBASE-LR/ER as 10 km / 40 km on single-mode fibre. Treat any reach number without a stated fibre grade (OM3, OM4, OS2 and so on) and data rate as incomplete, and confirm against the exact module datasheet before relying on it: connector losses, splices and older fibre grades reduce the distance you actually get.

How to choose, in order

  1. What speed does the host port support — 1G, 10G or 25G class? (See SFP vs SFP+ vs SFP28.)
  2. What fibre is already installed, multimode or single-mode, and what grade?
  3. How long is the actual cable run, including patch leads?
  4. Pick the transceiver class whose specified reach, on that fibre grade, exceeds your run with margin — then verify the exact module against the host vendor's supported list.

Limits

This is a terminology and reach-conditions explainer. It does not reproduce standards text, does not certify any module/host pairing, and makes no product recommendations. Power in the rack matters too: see rack PDU basics.

Sources

Numbers on this page are worked examples from the stated assumptions, not tests of any product. Always check your own equipment labels and manuals.